As people in power industry know, there is no operating
voltage which does not fluctuate according to the peak
and valley of power supply, varying from morn than 100v
to 240v or 250v. However, the consequence resulted from
the fluctuation is quite negative, which causes the influence
to the wire and comsnmption of lamps or appliances.
The energy generated by an appliance and the photometric
brightness given out by a lamp are not in direct proportion
to the power fed back to the appliance and lamp. When
the voltage is above or below a certain standard, the
efficiency will decrease. And the energy after deduction
of those for lightening leads to the heat abnormal operating
of appliance or lamp and the wear and tear of the wire,
which costs power and usable lifetime of lamp or appliance
for nothing.
2003£RL Type of Electricity
Saving Device is the best solution to these problems.
It finds out the best power point and then implements
dynamic tracing and adjustment based on realtime testing,
analysis and calculation by chip-microcomputer. It will not only protect
the appliance and lamp but also save the electricity,
which is just the ideal objective we pursue.
Brief introduction to structure£º
Major
technical parameters £º
The series products can operate smoothly under the
followed conditions£º
¡¡ ¡¡(1)Environment Temperature: ¡ª30¡æ ¡« 50¡æ
¡¡ ¡¡(2)Operating Temperature rise: < 60¡æ
¡¡ ¡¡(3)Atmospheric pressure: 79.5 ¡« 106.0KPa (under an
altitude of 2,000 m)
¡¡ ¡¡(4)Default operating voltage : 210V ¡« 225V,AC50HZ
¡¡ ¡¡(5)HD: 0
Types
and specifications£º
Type
Operation current
3-phase/single-phase
Dimensions of single-phase product(mm)
Dimensions of 3-phase product(mm)
2003-RL
30A
3-phase/single-phase
450*360*160
700*450*165
2003-RL
60A
3-phase/single-phase
2003-RL
100A
3-phase/single-phase
500*180*250
500*540*250
2003-RL
150A
3-phase/single-phase
500*180*268
500*540*268
Direction for use£º
¡¡¡¡1¡¢Do not adjust the electricity saving device by
yourself because the parameters have already been configured
before delivery.
¡¡¡¡2¡¢The device consists of 3 split modules; please identify
¡°In¡± and ¡°Out¡± of each line group when connect the lines.
¡¡¡¡3¡¢Connect Line N for system operation with conducting
wire of 2.5mm2. And connect the 3 groups
of Lines N the concentrative Line N, its size being
no less than 10mm2.
Schematic
drawing of connection wires£º
Booking
notice £º
¡¡ ¡¡¡¡ 1¡¢Indicate the amount of start current and operation
current of workload.
¡¡ ¡¡¡¡ 2¡¢Indicate the number of control phases, single
phase or 3-phase.
¡¡ ¡¡¡¡ 3¡¢For ventilation, press proper blind window on
the shell of device box.
¡¡ ¡¡¡¡ 4¡¢Detail the name, type, specification, quantity
and spare parts of the product you book.
¡¡ ¡¡¡¡ 5¡¢Warranty period of our products is in accordance
with ISO-2000 9000 QA System.
¡¡ ¡¡¡¡ 6¡¢An after-sales services card accompanies the
product.
Operating principle£º
s